| Videos |
File Size
(.wmv) |
| |
|
| FRANKEN |
|
Complete machining with one tool
With the latest development of FRANKEN, a "retainer component" of an injection die casting is completely machined in two clamping processes. Due to the application of the HPC-Jet-Cut Duplex, the retainer component can be machined from all sides. This new strategy makes it possible to reduce the number of tool places and the machining times by as much as 50% ... |
approx. 36.5 MB |
5-axis-machining of an impeller
Machining of an impeller. With modern tools and strategies, it is possible to rough and finish the spaces between the main rotor blades in a short time.
Among other tools, our conical ball-nose end mills are used in this application. |
approx. 27.1 MB |
Demonstration workpiece for AMB 2008 fair
The video shows the performance of our tools in material 1.2312 and in HSC-/HPC machining.
There are roughing and finishing jobs, and diverse thread production operations to be observed. |
approx. 16.2 MB |
5-axes-machining of a tire profile mold
Modern machining of a tire profile mold. With modern tools and strategies it is possible to produce in a short time and with a high degree of economic efficiency. Among other tools, our conical ball nose end mills are at work here. |
approx. 30.8 MB |
5-axes-machining of inlet ports
Modern tools and milling strategies permit the machining of form inlet ports in ways unheard of until now. This machining video shows our Lollipop ball nose end mill with its fully functional 240° cutting edge. |
approx. 39.5 MB |
5-axes-machining of a form duct
Threading and milling technology united in the complete machining of a cube with two counterpositioned form ducts. In the video you can observe thread milling, thread cutting, roughing and finishing in a cubic demonstration workpiece with modern tools. |
approx. 60.3 MB |
High-performance milling HSC-HPC
Roughing and finishing, one gear higher |
approx. 19.5 MB |
HPC / HSC / powRgrip®
New technologies require new clamping techniques, like for instance powRgrip®... |
approx. 18.0 MB |
5-axis HSC contour finishing
New technologies require new tools and new milling strategies... |
approx. 24.0 MB |
High-performance milling HPC-HSC
HPC and HSC are a great topic of discussion, but what is practical work like? |
approx. 9.0 MB |
HSC machining in 54 HRC
A 3D contour is produced with HSC milling tools and strategies. |
approx. 7.5 MB |
HPC machining in 54 HRC
The same workpiece is machined with HPC tools this time. |
approx. 9.0 MB |
Shrink-fit technology
Shrink-fit technology is an indispensable part of modern machining - FRANKEN can offer you alternatives even here... |
approx. 4.0 MB |
powRgrip®
Mechanical alternative to thermal shrink-fit and hydro expansion chucks. |
approx. 18.0 MB |
5-axis impeller machining
FRANKEN will be your technology partner, even for very special machining jobs... |
approx. 7.8 MB |
High-performance machining HPC-HSC
HPC and HSC stands for extra high machining volumes also... |
approx. 33.0 MB |
Impellers - a little bit faster
With optimized tools you can make the most of your machine dynamics... |
approx. 41.5 MB |
V-Max – at the upper limits
with your feed values
Real HSC machining... |
approx. 12.0 MB |
HSC-HPC in 3D
New strategies can also be used for multiple-axis machining. |
approx. 4.0 MB |
Milling instead of polishing!
Today, the trend is to save on reworking costs - by reducing polishing. |
approx. 17.5 MB |
HSC machining
Modern HSC machining in focus... |
approx. 30.5 MB |
HSC in aluminium
FRANKEN has HSC tools for the machining of aluminium also... |
approx. 9.5 MB |
Multiple-side machining
Multiple-side machining puts some speed into machine building. |
approx. 14.2 MB |
HPC-HSC
New dimensions with the Multi-Cut. |
approx. 30.0 MB |
Machine building in transition to HPC
HPC machining has become an indispensable part of machine building. |
approx. 19.7 MB |
Dynamic 5-axis and multilateral machining
We present our new Multi-Jet-Cut Duplex and HPC-Jet-Cut Duplex tools, by demonstrating dynamic 5-axis milling. |
approx. 28.4 MB |
